Valve function5/2-way, monostable Type of actuationElectric Valve size14 mm Standard nominal flow rate (standardised to DIN 1343)700 l/min ... 780 l/min pneumatic working portG1/8 Operating voltage24V DC Operating pressure0.3 MPa ... 0.8 MPa Operating pressure3 bar ... 8 bar DesignPiston gate valve Type of resetMechanical spring ApprovalRCM trademark c UL us - Recognized (OL) Degree of protectionIP40 IP65 With plug socket Nominal size5.6 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting Non-detenting Covered Type of pilotingPilot actuated Pilot air supplyInternal Symbol00991003 lapOverlap Pilot pressure0.3 MPa ... 0.8 MPa Pilot pressure3 bar ... 8 bar Suitability for vacuumno Switching time off40 ms Switching time on13 ms Duty cycle100% Max. positive test pulse with 0 signal700 µs Max. negative test pulse with 1 signal900 µs Characteristic coil data24 V DC: 1.0 W 24 V DC: low-current phase 0.3 W, high-current phase 1.0 W Permissible voltage fluctuations+/- 10 % Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 Restrictions for environmental and media temperature-5 ... 50° C Without holding current reduction Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Cleanroom classClass 5 according to ISO 14644-1 Media temperature-5 °C ... 60 °C Ambient temperature-5 °C ... 60 °C Product weight70 g Electrical connectionVia electrical sub-base Type of mountingEither: On manifold rail With through-hole Pneumatic connection, port 1G1/8 Pneumatic connection, port 2G1/8 Pneumatic connection, port 4G1/8 Pneumatic connection, port 5G1/8 Note on materialsRoHS-compliant Material sealsHNBR NBR Material housingWrought aluminium alloy

Type of mountingMounting plate, attached with screws Mounting positionFree convection Vertical Product weight1400 g DisplayGreen/yellow/red LED Operator controlsOptional: CDSB operator unit Conforms to standardEN 61800-3 EN 61800-5-1 EN 61800-5-2 EN ISO 13849-1 Based on standardEN 50581 EN 60204-1 EN 61508-1 EN 61508-2 EN 61508-3 EN 61508-4 EN 61508-5 EN 61508-6 EN 61508-7 EN 61800-2 EN 62061 ApprovalRCM trademark German Technical Control Board (TÜV) c UL us listed (OL) KC markKC-EMV CE mark (see declaration of conformity)To EU EMC Directive To EC Machinery Directive In accordance with EU RoHS Directive UKCA marking (see declaration of conformity)To UK instructions for EMC To UK regulations for machines To UK RoHS instructions Certificate issuing authorityGerman Technical Control Board (TÜV) Rheinland UK Ltd. 01/205U/5640.01/23 German Technical Control Board (TÜV) Rheinland 01/205/5640.01/23 UL E331130 Storage temperature-25 °C ... 55 °C Ambient temperature0 °C ... 50 °C Note on ambient temperaturePower must be reduced by 3% per °C at ambient temperatures above 40°C. UL ambient temperature0 °C ... 50 °C Relative air humidity5 - 90% Non-condensing Max. installation height2000 m Note on max. installation heightFrom 1000 m: power reduction by 1% per 100 m. Degree of protectionIP20 Protection classI Overvoltage categoryIII Pollution degree2 Immunity to surge6 kV Note on materialsRoHS-compliant LABS (PWIS) conformityVDMA24364 zone III Phases of nominal operating voltageSingle-phase Nominal operating voltage AC230 V Permissible voltage fluctuations-20 % / +15 % Input voltage range AC100 V ... 230 V Mains frequency48 Hz ... 62 Hz Nominal current, load supply5.6 A Peak current load power supply16.8 A Active PFCno Mains filterIntegrated System voltage to EN 61800-5-1300 V Max. short circuit current rating of the mains100 kA Mains typesTT TN IT Nominal voltage load voltage DC320 V Permissible range for load power supply-20%/+15% Max. intermediate circuit voltage DC395 V Brake resistor, integrated100 Ohm Pulse power, brake resistance1.6 kVA Pulse energy for braking resistor230 Ws Nominal power braking resistor (IEC)23 W Brake resistor, external67 Ohm ... 100 Ohm Max. continuous output of the external braking resistor (IEC)350 W Nominal voltage for logic power supply DC24 V Permissible range for logic voltage± 20 % Current consumption of logic power supply without clamping brake0.5 A Current consumption for logic supply with parking brake1.5 A Max. current consumption, logic power supply with clamping brake and I/O2.3 A Output voltage class AC3x (0 – input) V Nominal current per phase, effective4 A Peak current per phase, effective12 A Max. peak current duration2 s Controller nominal output700 VA Maximum output2000 VA Output frequency0 Hz ... 599 Hz Max. length of motor cable without external mains filter25 m Max. output current of holding brake1 A Max. voltage drop from logic supply to brake output0.8 V Number of inputs for motor temperature sensor1 Controller operating modeCascade controller P position controller PI speed controller PI current regulator for F or M Profile operation with record and direct mode Interpolated mode via fieldbus Synchronised operating modes Homing Setting-up Autotuning Operating modeField-oriented closed-loop control Position resolution 24 bit/rev Sampling rate 16 kHz PWM with 8 or 16 KHz Vector modulation with 3rd harmonic Real-time data acquisition 2x input capture (x, v, F) 2x output trigger (x, v, F) 2x position encoder input 1x SYNC interface for encoder emulation or encoder input Ethernet interface, functionParameterisation and commissioning Ethernet interface, protocolTCP/IP Field bus, protocolEtherCAT® EtherNet/IP Modbus/TCP PROFINET IRT PROFINET RT Fieldbus interface, functionBus connection incoming/outgoing EtherCAT® slave PROFINET slave EtherNet/IP slave Fieldbus linkEtherCAT EtherNet/IP Modbus/TCP PROFINET Communication profileCiA402 CoE (CANopen over EtherCAT®) EoE (Ethernet over EtherCAT®) FoE (File over EtherCAT®) PROFIdrive DriveProfile Process interfacingAC1: Adjustable-speed drives AC3: Drives with positioning function AC4: Synchronous servo application Adjustable-speed drives Drives with positioning function I/O mode for 256 positioning records Interpolated mode CSP Interpolated mode CST Interpolated mode CSV Field bus interface, transmission rate100 Mbit/s Field bus, connection type2x socket Field bus, connection systemRJ45 Encoder interface, functionBiSS-C ENDAT® 2.1 encoder EnDat® 2.2 encoder Hiperface-Geber Incremental encoder Nikon SIN/COS encoder Encoder interface 2, functionIncremental encoder SIN/COS encoder Synchronisation interface, functionEncoder emulation A/B/Z Encoder input A/B/Z Encoder interface output, features1 MHz maximum output frequency Max. 16384 ppr Encoder interface input, features1 MHz maximum output frequency Max. 16384 ppr Number of digital logic inputs12 Switching logic for inputsPNP (positive switching) Features of logic inputFreely configurable in some cases Safety inputs in some cases Not galvanically isolated Specification logic inputBased on IEC 61131-2, type 3 Working range of logic input-3 V ... 30 V Number of high-speed logic inputs2 Time resolution of high-speed logic inputs1 µs Number of digital logic outputs 24 V DC6 Switching logic for outputsPNP (positive switching) Features of digital logic outputsFreely configurable in some cases Not galvanically isolated Diagnostics outputs in some cases Max. current digital logic outputs20 mA Number of high-speed switching outputs2 Time resolution of high-speed switching outputs1 µs Number of floating switching outputs1 Max. current of the floating switching outputs50 mA Number of analogue setpoint inputs1 Features of setpoint inputsDifferential inputs Configurable for speed Configurable for current/force Working range setpoint input± 10 V Working range of analogue inputs± 10 V Impedance of setpoint input70 kOhm Safety functionSafe brake control (SBC) Safe torque off (STO) Safe Stop 1 (SS1) Safety Integrity Level (SIL)Safe brake control (SBC)/SIL 3/SILCL 3 Safe torque off (STO)/SIL 3/SILCL 3 Performance Level (PL)Safe brake control (SBC)/category 3, performance level e Safe Torque Off (STO)/category 4, performance level e Diagnostic coverage97 % SFF Safe Failure Fraction99 % Hardware fault tolerance1 Number of safe 2-pin inputs2 Number of diagnostic outputs2

Valve function3/2 open, single solenoid Type of actuationElectric Construction width14 mm Standard nominal flow rate (standardised to DIN 1343)900 l/min pneumatic working portG1/8 Operating voltage24V DC Operating pressure0.25 MPa ... 0.8 MPa Operating pressure2.5 bar ... 8 bar DesignPiston gate valve Type of resetPneumatic spring Approvalc UL us - Recognized (OL) Maritime classificationSee certificate Certificate issuing authorityDNV-TAA000032X UL MH19482 Degree of protectionIP65 With plug socket To IEC 60529 Nominal size6 mm Sealing principleSoft Mounting positionoptional Manual overrideDetenting via accessory Non-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991656 Valve position codeInscription label holder lapOverlap Switching time off27 ms Switching time on16 ms Duty cycle100% in conjunction with holding current reduction Max. positive test pulse with 0 signal1200 µs Max. negative test pulse with 1 signal900 µs Characteristic coil data24 V DC: 1.28 W Permissible voltage fluctuations-15%/+10% Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-5 °C ... 50 °C Ambient temperature-5 °C ... 50 °C Product weight60 g Electrical connection2-pin Type of mountingWith through-hole Pilot exhaust port 82M3 Pilot air port 12M3 Pneumatic connection, port 1G1/8 Pneumatic connection, port 2G1/8 Pneumatic connection, port 3G1/8 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function5/2 bistable Type of actuationElectric Construction width14 mm Standard nominal flow rate (standardised to DIN 1343)800 l/min pneumatic working portG1/8 Operating voltage24V DC Operating pressure0.2 MPa ... 0.8 MPa Operating pressure2 bar ... 8 bar DesignPiston gate valve Approvalc UL us - Recognized (OL) Maritime classificationSee certificate Certificate issuing authorityDNV-TAA000032X UL MH19482 Degree of protectionIP65 With plug socket To IEC 60529 Nominal size6 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting via accessory Non-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991013 Valve position codeInscription label holder lapOverlap Switching time reversal13 ms Duty cycle100% in conjunction with holding current reduction Max. positive test pulse with 0 signal1200 µs Max. negative test pulse with 1 signal900 µs Characteristic coil data24 V DC: 1.28 W Permissible voltage fluctuations-15%/+10% Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-5 °C ... 50 °C Ambient temperature-5 °C ... 50 °C Product weight115 g Electrical connection2-pin Type of mountingWith through-hole Pilot exhaust port 82M3 Pilot exhaust port 84M3 Pilot air port 12M3 Pilot air port 14M3 Pneumatic connection, port 1G1/8 Pneumatic connection, port 2G1/8 Pneumatic connection, port 3G1/8 Pneumatic connection, port 4G1/8 Pneumatic connection, port 5G1/8 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function5/2-way, monostable Type of actuationElectric Construction width14 mm Standard nominal flow rate (standardised to DIN 1343)400 l/min pneumatic working portQS-6 Operating voltage24V DC Operating pressure0.3 MPa ... 0.8 MPa Operating pressure3 bar ... 8 bar DesignPiston gate valve Type of resetPneumatic spring Approvalc UL us - Recognized (OL) Maritime classificationSee certificate Certificate issuing authorityDNV-TAA000032X UL MH19482 Degree of protectionIP65 With plug socket To IEC 60529 Nominal size6 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting via accessory Non-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991023 Valve position codeInscription label holder lapOverlap Switching time off32 ms Switching time on24 ms Duty cycle100% in conjunction with holding current reduction Max. positive test pulse with 0 signal1200 µs Max. negative test pulse with 1 signal900 µs Characteristic coil data24 V DC: 1.28 W Permissible voltage fluctuations-15%/+10% Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-5 °C ... 50 °C Ambient temperature-5 °C ... 50 °C Electrical connection2-pin Type of mountingWith through-hole Pilot exhaust port 82M3 Pilot exhaust port 84M3 Pilot air port 12M3 Pilot air port 14M3 Pneumatic connection, port 1QS-6 Pneumatic connection, port 2QS-6 Pneumatic connection, port 3G1/8 Pneumatic connection, port 4QS-6 Pneumatic connection, port 5G1/8 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function3/2-way, closed, monostable Type of actuationElectric Construction width18 mm Standard nominal flow rate (standardised to DIN 1343)1300 l/min pneumatic working portG1/4 Operating voltage24V DC Operating pressure0.25 MPa ... 1 MPa Operating pressure2.5 bar ... 10 bar DesignPiston gate valve Type of resetPneumatic spring Approvalc UL us - Recognized (OL) Maritime classificationSee certificate Certificate issuing authorityDNV-TAA000032X UL MH19482 Degree of protectionIP65 With plug socket To IEC 60529 Nominal size8 mm Sealing principleSoft Mounting positionoptional Manual overrideDetenting via accessory Non-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991655 Valve position codeInscription label holder lapOverlap Switching time off18 ms Switching time on28 ms Duty cycle100% Max. positive test pulse with 0 signal3300 µs Max. negative test pulse with 1 signal3100 µs Characteristic coil data24 V DC: 1.5 W Permissible voltage fluctuations-15%/+10% Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-5 °C ... 50 °C Ambient temperature-5 °C ... 50 °C Product weight150 g Electrical connectionType C Type of mountingWith through-hole Pilot exhaust port 82M5 Pilot air port 12M5 Pneumatic connection, port 1G1/4 Pneumatic connection, port 2G1/4 Pneumatic connection, port 3G1/4 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function3/2 open, monostable Type of actuationElectric Construction width18 mm Standard nominal flow rate (standardised to DIN 1343)1700 l/min pneumatic working portG1/4 Operating voltage24V DC Operating pressure0.25 MPa ... 1 MPa Operating pressure2.5 bar ... 10 bar DesignPiston gate valve Type of resetPneumatic spring Approvalc UL us - Recognized (OL) Maritime classificationSee certificate Certificate issuing authorityDNV-TAA000032X UL MH19482 Degree of protectionIP65 With plug socket To IEC 60529 Nominal size8 mm Sealing principleSoft Mounting positionoptional Manual overrideDetenting via accessory Non-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991656 Valve position codeInscription label holder lapOverlap Switching time off18 ms Switching time on28 ms Duty cycle100% Max. positive test pulse with 0 signal3300 µs Max. negative test pulse with 1 signal3100 µs Characteristic coil data24 V DC: 1.5 W Permissible voltage fluctuations-15%/+10% Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-5 °C ... 50 °C Ambient temperature-5 °C ... 50 °C Product weight150 g Electrical connectionType C Type of mountingWith through-hole Pilot exhaust port 82M5 Pilot air port 12M5 Pneumatic connection, port 1G1/4 Pneumatic connection, port 2G1/4 Pneumatic connection, port 3G1/4 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function5/3 closed Type of actuationElectric Construction width18 mm Standard nominal flow rate (standardised to DIN 1343)1450 l/min pneumatic working portG1/4 Operating voltage24V DC Operating pressure0.25 MPa ... 1 MPa Operating pressure2.5 bar ... 10 bar DesignPiston gate valve Type of resetMechanical spring Approvalc UL us - Recognized (OL) Maritime classificationSee certificate Certificate issuing authorityDNV-TAA000032X UL MH19482 Degree of protectionIP65 With plug socket To IEC 60529 Nominal size8 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting via accessory Non-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991033 Valve position codeInscription label holder lapOverlap Switching time off38 ms Switching time on20 ms Duty cycle100% Max. positive test pulse with 0 signal3300 µs Max. negative test pulse with 1 signal3100 µs Characteristic coil data24 V DC: 1.5 W Permissible voltage fluctuations-15%/+10% Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-5 °C ... 50 °C Ambient temperature-5 °C ... 50 °C Product weight280 g Electrical connectionType C Type of mountingWith through-hole Pilot exhaust port 82M5 Pilot exhaust port 84M5 Pilot air port 12M5 Pilot air port 14M5 Pneumatic connection, port 1G1/4 Pneumatic connection, port 2G1/4 Pneumatic connection, port 3G1/4 Pneumatic connection, port 4G1/4 Pneumatic connection, port 5G1/4 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function5/2 bistable Type of actuationElectric Construction width18 mm Standard nominal flow rate (standardised to DIN 1343)1500 l/min pneumatic working portG1/4 Operating voltage24V DC Operating pressure0.2 MPa ... 1 MPa Operating pressure2 bar ... 10 bar DesignPiston gate valve Approvalc UL us - Recognized (OL) Maritime classificationSee certificate Certificate issuing authorityDNV-TAA000032X UL MH19482 Degree of protectionIP65 With plug socket To IEC 60529 Nominal size8 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting via accessory Non-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991013 Valve position codeInscription label holder lapOverlap Switching time reversal13 ms Duty cycle100% Max. positive test pulse with 0 signal3300 µs Max. negative test pulse with 1 signal3100 µs Characteristic coil data24 V DC: 1.5 W Permissible voltage fluctuations-15%/+10% Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-5 °C ... 50 °C Ambient temperature-5 °C ... 50 °C Product weight270 g Electrical connectionType C Type of mountingWith through-hole Pilot exhaust port 82M5 Pilot exhaust port 84M5 Pilot air port 12M5 Pilot air port 14M5 Pneumatic connection, port 1G1/4 Pneumatic connection, port 2G1/4 Pneumatic connection, port 3G1/4 Pneumatic connection, port 4G1/4 Pneumatic connection, port 5G1/4 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function3/2-way, closed, monostable Type of actuationElectric Construction width24 mm Standard nominal flow rate (standardised to DIN 1343)2500 l/min pneumatic working portG3/8 Operating voltage24V DC Operating pressure0.25 MPa ... 1 MPa Operating pressure2.5 bar ... 10 bar DesignPiston gate valve Type of resetPneumatic spring Approvalc UL us - Recognized (OL) Maritime classificationSee certificate Certificate issuing authorityDNV-TAA000032X UL MH19482 Degree of protectionIP65 With plug socket To IEC 60529 Nominal size11 mm Sealing principleSoft Mounting positionoptional Manual overrideDetenting via accessory Non-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991655 Valve position codeInscription label holder lapOverlap Switching time off33 ms Switching time on50 ms Duty cycle100% Max. positive test pulse with 0 signal3300 µs Max. negative test pulse with 1 signal3100 µs Characteristic coil data24 V DC: 1.5 W Permissible voltage fluctuations-15%/+10% Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-5 °C ... 50 °C Ambient temperature-5 °C ... 50 °C Product weight220 g Electrical connectionType C Type of mountingWith through-hole Pilot exhaust port 82M5 Pilot air port 12M5 Pneumatic connection, port 1G3/8 Pneumatic connection, port 2G3/8 Pneumatic connection, port 3G3/8 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function3/2-way, closed, monostable Type of actuationElectric Construction width24 mm Standard nominal flow rate (standardised to DIN 1343)1650 l/min pneumatic working portQS-12 Operating voltage24V DC Operating pressure-0.09 MPa ... 1 MPa Operating pressure-0.9 bar ... 10 bar DesignPiston gate valve Type of resetPneumatic spring Approvalc UL us - Recognized (OL) Maritime classificationSee certificate Certificate issuing authorityDNV-TAA000032X UL MH19482 Degree of protectionIP65 With plug socket To IEC 60529 Nominal size11 mm Sealing principleSoft Mounting positionoptional Manual overrideDetenting via accessory Non-detenting Type of pilotingPilot actuated Pilot air supplyExternal Flow directionNon-reversible Symbol00991405 Valve position codeInscription label holder lapOverlap Pilot pressure0.25 MPa ... 1 MPa Pilot pressure2.5 bar ... 10 bar Switching time off33 ms Switching time on50 ms Duty cycle100% Max. positive test pulse with 0 signal3300 µs Max. negative test pulse with 1 signal3100 µs Characteristic coil data24 V DC: 1.5 W Permissible voltage fluctuations-15%/+10% Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-5 °C ... 50 °C Pilot mediumCompressed air to ISO 8573-1:2010 [7:4:4] Ambient temperature-5 °C ... 50 °C Electrical connectionType C Type of mountingWith through-hole Pilot exhaust port 82M5 Pilot air port 12M5 Pneumatic connection, port 1QS-12 Pneumatic connection, port 2QS-12 Pneumatic connection, port 3G3/8 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function5/2 bistable Type of actuationElectric Construction width24 mm Standard nominal flow rate (standardised to DIN 1343)3200 l/min pneumatic working portG3/8 Operating voltage24V DC Operating pressure0.2 MPa ... 1 MPa Operating pressure2 bar ... 10 bar DesignPiston gate valve Approvalc UL us - Recognized (OL) Maritime classificationSee certificate Certificate issuing authorityDNV-TAA000032X UL MH19482 Degree of protectionIP65 With plug socket To IEC 60529 Nominal size11 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting via accessory Non-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991013 Valve position codeInscription label holder lapOverlap Switching time reversal25 ms Duty cycle100% Max. positive test pulse with 0 signal3300 µs Max. negative test pulse with 1 signal3100 µs Characteristic coil data24 V DC: 1.5 W Permissible voltage fluctuations-15%/+10% Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-5 °C ... 50 °C Ambient temperature-5 °C ... 50 °C Product weight390 g Electrical connectionType C Type of mountingWith through-hole Pilot exhaust port 82M5 Pilot exhaust port 84M5 Pilot air port 12M5 Pilot air port 14M5 Pneumatic connection, port 1G3/8 Pneumatic connection, port 2G3/8 Pneumatic connection, port 3G3/8 Pneumatic connection, port 4G3/8 Pneumatic connection, port 5G3/8 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve functionUnlockable check valve function Pneumatic connection 1G3/8 Pneumatic connection 2G3/8 Pilot air port 21G1/4 Actuation typePneumatic Type of mountingScrew-in With external thread Operating pressure0.05 MPa ... 1 MPa Operating pressure0.5 bar ... 10 bar Pilot pressure MPa0.1 MPa ... 1 MPa Pilot pressure1 bar ... 10 bar Pilot pressure psi14.5 psi ... 145 psi Ambient temperature-10 °C ... 60 °C Operating mediumCompressed air as per ISO 8573-1:2010 [7:4:4] Maritime classificationSee certificate Mounting positionAny Symbol00991456 Standard flow rate 1->2 (6-0)1500 l/min Standard nominal flow rate 1->2 (6-5)1100 l/min Information on operating and pilot mediaOperation with oil lubrication possible (required for further use) Corrosion resistance class (CRC)2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B2-L Cleanroom classClass 4 according to ISO 14644-1 Storage temperature-10 °C ... 60 °C Temperature of medium-10 °C ... 60 °C Pilot mediumCompressed air as per ISO 8573-1:2010 [7:4:4] Nominal tightening torque12.5 Nm Tolerance for nominal tightening torque± 10% Product weight62.9 g Note on materialsRoHS-compliant Seals materialNBR Hollow bolt materialWrought aluminum alloy Anodized Releasing ring materialPOM Non-return collar materialNBR Swivel joint materialDie-cast zinc

Valve function5/2 double solenoid Type of actuationElectric Construction width76 mm Standard nominal flow rate (standardised to DIN 1343)6000 l/min pneumatic working portSub-base size 4 to ISO 5599-1 G3/4 Operating voltageVia solenoid coil, must be ordered separately Operating pressure2 bar ... 16 bar DesignPiston gate valve Degree of protectionIP65 Nominal size18 mm Grid dimension82 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Conforms to standardISO 5599-1 Manual overrideNon-detenting ISO code455 Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991005 lapOverlap Switching time reversal40 ms Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-10 °C ... 60 °C Sound pressure level85 dB(A) Ambient temperature-10 °C ... 50 °C Product weight2600 g Type of mountingOn sub-base Via through-hole and screw Pilot exhaust port 82M5 Pilot exhaust port 84M5 Pneumatic connection, port 1Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 2Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 3Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 4Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 5Sub-base size 4 to ISO 5599-1 Note on materialsRoHS-compliant Material sealsNBR Material housingAluminium

Valve function5/2 double solenoid Type of actuationElectric Construction width52 mm Standard nominal flow rate (standardised to DIN 1343)4500 l/min pneumatic working portG1/2 Operating voltageVia solenoid coil, must be ordered separately Operating pressure0.2 MPa ... 0.8 MPa Operating pressure2 bar ... 8 bar DesignPoppet seat Approvalc UL us - Recognized (OL) Degree of protectionIP65 Nominal size14 mm Grid dimension69 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting Type of pilotingPilot actuated Flow directionNon-reversible Symbol00995754 lapUnderlap b value0.3 C value19.5 l/sbar Max. switching frequency25 Hz Switching time reversal20 ms Max. positive test pulse with 0 signal2200 µs Max. negative test pulse with 1 signal3700 µs Characteristic coil dataSee solenoid coil, to be ordered separately Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC1 - Low corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Storage temperature-20 °C ... 60 °C Media temperature-10 °C ... 60 °C Ambient temperature-5 °C ... 40 °C Product weight1210 g Electrical connectionVia F coil, to be ordered separately Type of mountingEither: On manifold rail With through-hole Pilot exhaust port 82M5 Pilot exhaust port 84M5 Pneumatic connection, port 1G1/2 Pneumatic connection, port 2G1/2 Pneumatic connection, port 3G1/2 Pneumatic connection, port 4G1/2 Pneumatic connection, port 5G1/2 Note on materialsRoHS-compliant Material sealsNBR TPE-U(PU) Material housingDie-cast aluminium

Valve function5/2 double solenoid Type of actuationElectric Construction width40 mm Standard nominal flow rate (standardised to DIN 1343)2000 l/min pneumatic working portG3/8 Operating pressure0.2 MPa ... 0.8 MPa Operating pressure2 bar ... 8 bar DesignPiston gate valve Type of resetMechanical spring Nominal size12 mm Grid dimension41 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideNon-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991013 lapOverlap Max. switching frequency3 Hz Switching time reversal12 ms Max. positive test pulse with 0 signal2200 µs Max. negative test pulse with 1 signal3700 µs Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC1 - Low corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Storage temperature-40 °C ... 60 °C Media temperature-10 °C ... 60 °C Ambient temperature-5 °C ... 40 °C Product weight650 g Electrical connectionVia F coil, to be ordered separately Type of mountingEither: On PR rail With through-hole Pilot exhaust port 82M5 Pilot exhaust port 84M5 Pneumatic connection, port 1G3/8 Pneumatic connection, port 2G3/8 Pneumatic connection, port 3G3/8 Pneumatic connection, port 4G3/8 Pneumatic connection, port 5G3/8 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function5/2 double solenoid Type of actuationElectric Construction width40 mm Standard nominal flow rate (standardised to DIN 1343)2000 l/min pneumatic working portG3/8 Operating pressure0.2 MPa ... 0.8 MPa Operating pressure2 bar ... 8 bar DesignPiston gate valve Type of resetMechanical spring Nominal size12 mm Grid dimension41 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideNon-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991013 lapOverlap Max. switching frequency3 Hz Switching time reversal12 ms Max. positive test pulse with 0 signal2200 µs Max. negative test pulse with 1 signal3700 µs Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC1 - Low corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Storage temperature-40 °C ... 60 °C Media temperature-10 °C ... 60 °C Ambient temperature-5 °C ... 40 °C Product weight650 g Electrical connectionVia F coil, to be ordered separately Type of mountingEither: On PR rail With through-hole Pilot exhaust port 82M5 Pilot exhaust port 84M5 Pneumatic connection, port 1G3/8 Pneumatic connection, port 2G3/8 Pneumatic connection, port 3G3/8 Pneumatic connection, port 4G3/8 Pneumatic connection, port 5G3/8 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)Corrosion resistance class CRC1 - Low corrosion stressLABS (PWIS) conformityVDMA24364-B1/B2-LStorage temperature-20 °C ... 60 °CMedia temperature-10 °C ... 60 °CAmbient temperature-5 °C ... 40 °CProduct weight344 gElectrical connectionVia F coil, to be ordered separatelyType of mountingEither:On manifold railWith through-hole

Valve function5/2 bistable Type of actuationElectric Construction width54 mm Standard nominal flow rate (standardised to DIN 1343)2300 l/min pneumatic working portSub-base size 2 to ISO 5599-1 G3/8 Operating voltageVia solenoid coil, must be ordered separately Operating pressure0.2 MPa ... 1 MPa Operating pressure2 bar ... 10 bar DesignPiston gate valve Approvalc UL us - Recognized (OL) Maritime classificationSee certificate Certificate issuing authorityDNV-TAA000032X Degree of protectionIP65 Nominal size11.5 mm Grid dimension56 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Conforms to standardISO 5599-1 Manual overrideDetenting via accessory Non-detenting ISO code255 Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991005 lapOverlap Switching time reversal21 ms Max. positive test pulse with 0 signal3700 µs Max. negative test pulse with 1 signal4600 µs Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Vibration resistanceTransport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27 LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-5 °C ... 50 °C Sound pressure level85 dB(A) Ambient temperature-5 °C ... 50 °C Product weight940 g Electrical connectionVia N1 coil, to be ordered separately Type of mountingOn sub-base Via through-hole and screw Pilot exhaust port 82M5 Pilot exhaust port 84M5 Pneumatic connection, port 1Sub-base size 2 to ISO 5599-1 Pneumatic connection, port 2Sub-base size 2 to ISO 5599-1 Pneumatic connection, port 3Sub-base size 2 to ISO 5599-1 Pneumatic connection, port 4Sub-base size 2 to ISO 5599-1 Pneumatic connection, port 5Sub-base size 2 to ISO 5599-1 Note on materialsRoHS-compliant Material sealsHNBR NBR Material housingDie-cast aluminium

Valve function3/2-way, closed, monostable Type of actuationElectric Construction width30 mm Standard nominal flow rate (standardised to DIN 1343)50 l/min pneumatic working portSub-base size 30 mm to ISO 15218 Operating voltage24V DC 48V AC Operating pressure0.1 MPa ... 1.6 MPa Operating pressure1 bar ... 16 bar Operating pressure14.5 psi ... 232 psi DesignPoppet seat Type of resetMechanical spring Degree of protectionIP65 Nominal size1.3 mm Grid dimension42 mm Exhaust-air functionWithout flow control option Based on standardISO 15218 Sealing principleSoft Mounting positionoptional Conforms to standardISO 15218 Manual overrideNon-detenting Type of pilotingDirect Flow directionNon-reversible Symbol00991308 lapUnderlap Switching time off9 ms Switching time on11 ms Duty cycle100% Characteristic coil data24 V DC: 6.8 W 48 V AC: 50 Hz, pick-up power 14.5 VA, holding power 9.9 VA 53 V AC: 60 Hz, pick-up power 15.0 VA, holding power 9.3 VA Permissible voltage fluctuations+/- 10 % Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B2-L Media temperature-15 °C ... 80 °C Ambient temperature-15 °C ... 50 °C Product weight140 g Electrical connectionType A To DIN EN 175301-803 Type of mountingOn sub-base With through-hole Pneumatic connection, port 1Sub-base Pneumatic connection, port 2Sub-base Pneumatic connection, port 3Not ducted Note on materialsRoHS-compliant Material sealsFPM

Valve function5/2-way, monostable Type of actuationElectric Construction width76 mm Standard nominal flow rate (standardised to DIN 1343)6000 l/min pneumatic working portSub-base size 4 to ISO 5599-1 G3/4 Operating voltage24V DC Operating pressure3 bar ... 16 bar DesignPiston gate valve Type of resetPneumatic spring Degree of protectionIP65 Nominal size18 mm Grid dimension82 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Conforms to standardISO 5599-1 Manual overrideNon-detenting ISO code451 Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991049 lapOverlap Switching time off160 ms Switching time on120 ms Duty cycle100% Max. positive test pulse with 0 signal4300 µs Max. negative test pulse with 1 signal2100 µs Characteristic coil data24 V DC: 6.8 W 48 V AC: 50/60 Hz, pick-up power 14.5 VA, holding power 9.9 VA Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-10 °C ... 60 °C Sound pressure level85 dB(A) Ambient temperature-10 °C ... 50 °C Product weight2600 g Electrical connectionTo DIN EN 175301-803 Type of mountingOn sub-base Via through-hole and screw Pilot exhaust port 84M5 Pneumatic connection, port 1Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 2Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 3Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 4Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 5Sub-base size 4 to ISO 5599-1 Note on materialsRoHS-compliant Material sealsNBR Material housingAluminium

Valve function5/3 exhausted Type of actuationElectric Construction width76 mm Standard nominal flow rate (standardised to DIN 1343)4800 l/min pneumatic working portSub-base size 4 to ISO 5599-1 G3/4 Operating voltage24V DC Operating pressure3 bar ... 16 bar DesignPiston gate valve Type of resetMechanical spring Degree of protectionIP65 Nominal size18 mm Grid dimension82 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Conforms to standardISO 5599-1 Manual overrideNon-detenting ISO code457 Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991082 lapOverlap Switching time off290 ms Switching time on85 ms Duty cycle100% Max. positive test pulse with 0 signal4300 µs Max. negative test pulse with 1 signal2100 µs Characteristic coil data24 V DC: 6.8 W 48 V AC: 50/60 Hz, pick-up power 14.5 VA, holding power 9.9 VA Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-10 °C ... 60 °C Sound pressure level85 dB(A) Ambient temperature-10 °C ... 50 °C Product weight2600 g Electrical connectionTo DIN EN 175301-803 Type of mountingOn sub-base Via through-hole and screw Pilot exhaust port 82M5 Pilot exhaust port 84M5 Pneumatic connection, port 1Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 2Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 3Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 4Sub-base size 4 to ISO 5599-1 Pneumatic connection, port 5Sub-base size 4 to ISO 5599-1 Note on materialsRoHS-compliant Material sealsNBR Material housingAluminium

MDH-5/3G-3/4-D-4-24DC

Valve function3/2-way, closed, monostable Type of actuationElectric Construction width52 mm Standard nominal flow rate (standardised to DIN 1343)3700 l/min pneumatic working portG1/2 Operating voltageVia solenoid coil, must be ordered separately Operating pressure-0.095 MPa ... 1 MPa Operating pressure-0.95 bar ... 10 bar DesignPoppet seat Type of resetMechanical spring Approvalc UL us - Recognized (OL) Degree of protectionIP65 Nominal size14 mm Grid dimension69 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting Type of pilotingPilot actuated Pilot air supplyExternal Flow directionReversible Symbol00992879 lapUnderlap Pilot pressure0.1 MPa ... 0.8 MPa Pilot pressure1 bar ... 8 bar b value0.3 Switching time off90 ms Switching time on18 ms Max. positive test pulse with 0 signal2200 µs Max. negative test pulse with 1 signal3700 µs Characteristic coil dataSee solenoid coil, to be ordered separately Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC1 - Low corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Storage temperature-20 °C ... 60 °C Media temperature-10 °C ... 60 °C Pilot mediumCompressed air to ISO 8573-1:2010 [7:4:4] Ambient temperature-5 °C ... 40 °C Product weight1100 g Electrical connectionVia F coil, to be ordered separately Type of mountingEither: On manifold rail With through-hole Pilot exhaust port 82M5 Pilot air port 12G1/8 Pneumatic connection, port 1G1/2 Pneumatic connection, port 2G1/2 Pneumatic connection, port 3G1/2 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function3/2-way, closed, monostable Type of actuationElectric Construction width26 mm Standard nominal flow rate (standardised to DIN 1343)500 l/min pneumatic working portG1/8 Operating voltageVia solenoid coil, must be ordered separately Operating pressure0.15 MPa ... 0.8 MPa Operating pressure1.5 bar ... 8 bar DesignPoppet seat Type of resetMechanical spring CE mark (see declaration of conformity)To EU Explosion Protection Directive (ATEX) Explosion protection certification outside the EUEPL Db (GB) EPL Gb (GB) UKCA marking (see declaration of conformity)To UK EX instructions ATEX category gasII 2G ATEX category dustII 2D Explosion ignition protection type for gasEx h IIC T4 Gb Explosion ignition protection type for dustEx h IIIC T130°C Db Explosion ambient temperature-5 °C <= Ta <= +40 °C Degree of protectionIP65 Nominal size5 mm Grid dimension27 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting Type of pilotingPilot actuated Flow directionNon-reversible Symbol00991041 lapUnderlap Switching time off29 ms Switching time on9 ms Max. positive test pulse with 0 signal2200 µs Max. negative test pulse with 1 signal3700 µs Characteristic coil dataSee solenoid coil, to be ordered separately Explosion protectionZone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC1 - Low corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Storage temperature-20 °C ... 60 °C Media temperature-5 °C ... 40 °C Ambient temperature-5 °C ... 40 °C Product weight240 g Electrical connectionVia F coil, to be ordered separately Type of mountingEither: On manifold rail With through-hole Breather connectionM5 Pilot exhaust port 82M5 Pneumatic connection, port 1G1/8 Pneumatic connection, port 2G1/8 Pneumatic connection, port 3G1/8 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function3/2-way, closed, monostable Type of actuationElectric Construction width68 mm Standard nominal flow rate (standardised to DIN 1343)7500 l/min pneumatic working portG3/4 Operating voltageVia solenoid coil, must be ordered separately Operating pressure-0.095 MPa ... 1 MPa Operating pressure-0.95 bar ... 10 bar DesignPoppet seat Type of resetMechanical spring Approvalc UL us - Recognized (OL) Degree of protectionIP65 Nominal size19 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting Type of pilotingPilot actuated Pilot air supplyExternal Flow directionReversible Symbol00992879 lapUnderlap Pilot pressure0.1 MPa ... 0.8 MPa Pilot pressure1 bar ... 8 bar Switching time off32 ms Switching time on36 ms Max. positive test pulse with 0 signal2200 µs Characteristic coil dataSee solenoid coil, to be ordered separately Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC1 - Low corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Storage temperature-20 °C ... 60 °C Media temperature-10 °C ... 60 °C Pilot mediumCompressed air to ISO 8573-1:2010 [7:4:4] Ambient temperature-5 °C ... 40 °C Product weight1260 g Electrical connectionVia F coil, to be ordered separately Type of mountingEither: On manifold rail With through-hole Pilot exhaust port 82M5 Pilot air port 12G1/8 Pneumatic connection, port 1G3/4 Pneumatic connection, port 2G3/4 Pneumatic connection, port 3G3/4 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function5/2-way, monostable Type of actuationElectric Construction width52 mm Standard nominal flow rate (standardised to DIN 1343)3700 l/min pneumatic working portG1/2 Operating voltageVia solenoid coil, must be ordered separately Operating pressure0.2 MPa ... 0.8 MPa Operating pressure2 bar ... 8 bar DesignPoppet seat Type of resetMechanical spring Approvalc UL us - Recognized (OL) Degree of protectionIP65 Nominal size14 mm Grid dimension69 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting Type of pilotingPilot actuated Flow directionNon-reversible Symbol00991035 lapUnderlap b value0.32 Switching time off150 ms Switching time on21 ms Max. positive test pulse with 0 signal2200 µs Max. negative test pulse with 1 signal3700 µs Characteristic coil dataSee solenoid coil, to be ordered separately Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC1 - Low corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Storage temperature-20 °C ... 60 °C Media temperature-10 °C ... 60 °C Ambient temperature-5 °C ... 40 °C Product weight1135 g Electrical connectionVia F coil, to be ordered separately Type of mountingEither: On manifold rail With through-hole Pilot exhaust port 84M5 Pneumatic connection, port 1G1/2 Pneumatic connection, port 2G1/2 Pneumatic connection, port 3G1/2 Pneumatic connection, port 4G1/2 Pneumatic connection, port 5G1/2 Note on materialsRoHS-compliant Material sealsNBR TPE-U(PU) Material housingDie-cast aluminium

Valve function5/2-way, monostable Type of actuationElectric Construction width30.5 mm Standard nominal flow rate (standardised to DIN 1343)1000 l/min pneumatic working portG1/4 Operating voltageVia solenoid coil, must be ordered separately Operating pressure0.22 MPa ... 0.8 MPa Operating pressure2.2 bar ... 8 bar DesignPoppet seat Type of resetMechanical spring Approvalc UL us - Recognized (OL) Degree of protectionIP65 Nominal size7 mm Grid dimension32 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting Type of pilotingPilot actuated Flow directionNon-reversible Symbol00991035 lapUnderlap b value0.19 C value4.49 l/sbar Switching time off29 ms Switching time on9 ms Max. positive test pulse with 0 signal2200 µs Max. negative test pulse with 1 signal3700 µs Characteristic coil dataSee solenoid coil, to be ordered separately Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC1 - Low corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Storage temperature-20 °C ... 60 °C Media temperature-10 °C ... 60 °C Ambient temperature-5 °C ... 40 °C Product weight290 g Electrical connectionVia F coil, to be ordered separately Type of mountingEither: On manifold rail With through-hole Pilot exhaust port 84M5 Pneumatic connection, port 1G1/4 Pneumatic connection, port 2G1/4 Pneumatic connection, port 3G1/4 Pneumatic connection, port 4G1/4 Pneumatic connection, port 5G1/4 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium

Valve function5/2-way, monostable Type of actuationElectric Construction width26 mm Standard nominal flow rate (standardised to DIN 1343)750 l/min pneumatic working portG1/8 Operating pressure0.2 MPa ... 1 MPa Operating pressure2 bar ... 10 bar DesignPoppet seat Type of resetMechanical spring Nominal size5 mm Sealing principleSoft Mounting positionoptional Manual overrideNon-detenting Type of pilotingPilot actuated Pilot air supplyInternal Flow directionNon-reversible Symbol00991035 lapUnderlap b value0.34 C value3 l/sbar Max. switching frequency3 Hz Switching time off30 ms Switching time on10 ms Max. positive test pulse with 0 signal2200 µs Max. negative test pulse with 1 signal3700 µs Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC1 - Low corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Storage temperature-40 °C ... 60 °C Media temperature-10 °C ... 60 °C Ambient temperature-5 °C ... 40 °C Product weight220 g Electrical connectionVia F coil, to be ordered separately Type of mountingEither: On PR rail With through-hole Pilot exhaust port 84M5 Pneumatic connection, port 1G1/8 Pneumatic connection, port 2G1/8 Pneumatic connection, port 3G1/8 Pneumatic connection, port 4G1/8 Pneumatic connection, port 5G1/8 Note on materialsRoHS-compliant Material sealsNBR TPE-U(PU) Material housingDie-cast aluminium

Valve function5/2-way, monostable Type of actuationElectric Construction width26 mm Standard nominal flow rate (standardised to DIN 1343)500 l/min pneumatic working portG1/8 Operating voltageVia solenoid coil, must be ordered separately Operating pressure0 MPa ... 1 MPa Operating pressure0 bar ... 10 bar DesignPoppet seat Type of resetMechanical spring Approvalc UL us - Recognized (OL) Degree of protectionIP65 Nominal size5 mm Grid dimension27 mm Exhaust-air functionWith flow control option Sealing principleSoft Mounting positionoptional Manual overrideDetenting Type of pilotingPilot actuated Pilot air supplyExternal Flow directionNon-reversible Symbol00991024 lapUnderlap Pilot pressure0.12 MPa ... 0.8 MPa Pilot pressure1.2 bar ... 8 bar Switching time off36 ms Switching time on8 ms Max. positive test pulse with 0 signal2200 µs Max. negative test pulse with 1 signal3700 µs Characteristic coil dataSee solenoid coil, to be ordered separately Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC1 - Low corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Storage temperature-20 °C ... 60 °C Media temperature-10 °C ... 60 °C Pilot mediumCompressed air to ISO 8573-1:2010 [7:4:4] Ambient temperature-5 °C ... 40 °C Product weight270 g Electrical connectionVia F coil, to be ordered separately Type of mountingEither: On manifold rail With through-hole Pilot exhaust port 84M5 Pilot air port 14M5 Pneumatic connection, port 1G1/8 Pneumatic connection, port 2G1/8 Pneumatic connection, port 3G1/8 Pneumatic connection, port 4G1/8 Pneumatic connection, port 5G1/8 Note on materialsRoHS-compliant Material sealsNBR Material housingDie-cast aluminium